Visbella Headlight Restoration System manual
Instructions
Prepare:
Clean the lens with water, tape the surrounding of lens to avoid scratches.
Wet the sanding disc and attach it to the backer pad.
Sand with three different grits to make a completely removal of the heavy yellowing, fading and corrosion.
Notes: Use the sanding disc from coarse to fine: P800→P1200 →P2000, otherwise will result in failure.
Step 1
Step 2
Polish and Protect
Remove the masking tape and wipe the headlight lens using attached cleaning cloth. Using UV Protective Paste to polish and prevent UV damage.
Note
How to apply UV Protective Paste ?
In a cool shade , using UV Protective Paste to polish headlight surface with white sponge gently toward a direction of smearing until the varnish is evenly coated on the lamp surface. Set it aside for 15 minutes, then the car moved under the sun (exposure above 2 hours)