Visbella Touch Screen Repair Kit
Visbella® DIY Touch Screen Repair Kit can be applied to a shattered touch screen glass phone or tablet to seal cracks and gaps. After drying, the glue seals these areas, giving you the ability to run your finger over the surface and get the same reaction you are used to. It does not change the physical look of the cracks, it does seal them from further cracking and physical damage to your skin. Odds are you will crack your glass screen at some point, have a bottle of our Touch Screen Repair Glue handy for the inevitable.
Instructions
Step 1
Clean out any glass particles from the break place using a push pin if necessary. Thoroughly remove oil and dirt from screen surface with provided cleaning cloth. Make sure the screen is dry before applying the glue.
Use included masking tape to cover buttons, microphones to avoid the liquid glue flow into it.
Step 2
Slowly squeeze a few drops of screen repair glue on a break area. Use the scraper to thin out the glue and push it into cracks, make liquid glue full gap completely, then stay 5-10mins. Liquid glue is used to seal cracks and sharp edges, restore connectivity and stop glass shards from splintering, cutting your fingers.
Step 3
Place the clear curing film over the repair area when screen surface still wet, rubbing lightly over clear film to make it smooth. Let screen stay under the sunshine for 15-20mins, to make the repair glue fully cured.
Step 4
Remove the curing film, put the fabric on the break area, drop release agent on the fabric to get it soaked.
Stay 4-5mins to let the extra glue on screen get dissolved by the release agent and remove it with the fabric. Then clean it thoroughly with the alcohol prep pad and remove the mask tape.