1. Clean the repaired area with sandpaper. The surface to be repaired must be clean, dry and dust-free. Put on protective gloves.

2. Cut off both tips.

3. Squeeze the required amount of the product and mix well (2-3min) until you get a homogeneous mass.

4. Apply to surfaces to be repaired. Primary fixation – 5min. Fully freezes in 1 hour (at 25ºC ). 5. Cover the dosing syringe with a cap.

May not work well with polypropylene (PP) or polyethylene (PE) plastic.

Carefully: Contains epoxy and polyamine resins.